Nespresso VertuoPlus Deluxe Not Working —- How To Fix It?

Are you annoyed that your Nespresso VertuoPlus Deluxe is malfunctioning? If so, you’ve come to the correct place. I’ll go over the most frequent problems with Nespresso VertuoPlus Deluxe Coffee makers in this article, along with solutions. I’ll also share some tips for preserving your coffee maker’s effectiveness and preventing new issues.

The good news is that you can quickly fix problems with Nespresso VertuoPlus Deluxe at home with essential tools and clear instructions. Thus, if your VertuoPlus Deluxe isn’t working, do not worry.

The most common reasons why your Nespresso VertuoPlus Deluxe stops working or not working as it used to are given below, along with solutions:

Problem 1: Why There Is No Light On the Coffee Button?

Your Nespresso VertuoPlus Deluxe has one button for operation, indicating Green, Orange, and Red lights for multiple purposes. The green light indicates regular use, the Orange light is designated for special functions, and the Red light indicates a warning or error. What if you will get no light indication? Follow the steps written below.

Reason 1: Your VertuoPlus Deluxe Turned OFF Automatically

If your machine is on and suddenly the button lights go out, your coffee maker must be turned “OFF” automatically.

Solution: Turn The Nespresso VertuoPlus Deluxe ON

Push the Coffee button to turn the Nespresso VertuoPlus Deluxe machine ON or “UNLOCK” it by pushing the lever up. If the problem persists, call Nespresso (1800 812 660).

Reason 2: Issue With Your Power Source

If you plug your Nespresso into the power outlet and the lights on the Coffee button are not lighting up, you must have an issue with your power source.  

Solution: Check The Mains, Plug, Voltage, And Fuse

Before plugging your machine into the power source, you must check the mains, plug, voltage, and fuse. Maybe your Nespresso’s power specification (120V) does not match your home power source. In case of a problem, call the Nespresso Club (1800 812 660). 

Problem 2: Why Is The Coffee Not Coming Out Of My Nespresso VertuoPlus Deluxe?

Well, this one can get a bit complicated and devastating too. You must be excitedly waiting for a cup of coffee early in the morning or after a long hectic day, and eventually, you will get no coffee. Let’s resolve this issue by understanding the reasons and possible solutions.

Reason 1: Issue With VertuoPlus Setup

The possible reason for this issue is maybe you did not set your VertuoPlus according to the user manual. Let’s check that you put your Nespresso correctly.

Solution: Check The SOPs

Let’s check the SOPs together, and after ensuring each point, mark each in your mind.

• Make sure that the water tank is filled with fresh water.
• Position the water tank vertically on the machine’s arm until there is a ‘click’ sound.
• You should insert a new capsule in the capsule container and ensure that the dome shape of the coffee capsule faces downward.
• Close the machine head by pushing the lever down. The machine head will close automatically, with an electrical mechanism. 
• After setting your Nespresso for brewing, plug your machine into the power outlet. Push the coffee button and ensure that the light on the coffee button is GREEN. 

Reason 2: Your VertuoPlus Deluxe Required Descaling

Different regions have different water types, which vary in calcium and mineral contents. Due to this, the buildup can occur in your coffee machine from calcium, magnesium, and other minerals. Descaling is a process that removes this buildup, preserves the coffee flavor, and avoids appliance breakdown.

Solution: Descale Your VertuoPlus Deluxe

Descale the Nespresso VertuoPlus Deluxe by performing the following steps:

1. As the light on the button has turned half red and half green, the descaling alert shows. After this alert indicates, you can just brew a few coffees before descaling is required.
2. Press the coffee button to start the machine.
3. Pushing the lever upward will unlock the machine’s head, allowing the used capsule to be ejected.
4. By lowering the lever, the machine head can be closed.
5. Push the lever for 3 seconds to turn the machine off.
6. Empty the used capsule container and the cup support.
7. One unit of Nespresso descaling liquid and at least 17 ounces of water should be added to the tank.
8. Push the coffee button and the lever down for three seconds while the machine is off to access the special functions menu.
9. A steady orange light indicates the entrance to the special functions menu.
10. To select descaling from the menu, pull the lever once and release it.
11. To indicate the entrance of the machine in descaling mode, the orange will blink once every 2 seconds.   

Note: You have to choose the option within 2 minutes of entering the menu mode; otherwise, the machine will exit the menu mode (ready mode).

12. Put a container under the coffee spout that can hold at least 27 ounces.
13. To start descaling, press and release the button once.
14. During the whole descaling procedure, the orange light will flash. The moment the cycle is finished, the machine will stop automatically.
15. Remember to pause the procedure at any point by pressing the button.
16. Start a rinsing cycle after the descaling cycle is finished. Fill the tank with new water after properly emptying, cleaning, and rinsing the tank and cup support.
17. To start the rinsing cycle, press and release the coffee button once. The moment the process is finished, the machine will stop automatically.
18. Every two seconds, the orange light will flash once. Refill the tank with clean drinking water after rinsing.
19. Press and hold the button and the lever simultaneously for three seconds, or until the light turns green, to exit the descaling mode. Give the machine ten minutes to rest. The device is currently prepared for use.

Reason 3: Your Vertuoplus Deluxe Required Cleaning

To ensure the long life of your VertuoPlus and enjoy the taste and quality of your coffee, 

Solution: Clean Your Vertuoplus Deluxe

Perform a cleaning of your Nespresso as per the steps mentioned below.

1. Before adding fresh drinking water, clean the tank and lid thoroughly. Set the water tank in position.
2. Clean off the cup support. A container of at least 27 fl oz (0.8 l) should be placed beneath the coffee outlet.
3. By pulling the lever up, you can unlock the machine’s head. 
4. After the used capsule has been expelled, you can close the device. Rinse and empty the capsule container.
5. To begin the cleaning cycle, press the button three times in two seconds.
6. Throughout the process, the ORANGE light will blink. The time it takes for a flow to come out will be less than two minutes.
7. For five minutes, the cleaning process will run automatically. Three cycles of pumping water in, interior cleansing, and flowing out are required to complete the process.
8. Pressing the coffee button can terminate the procedure whenever you choose. A persistent GREEN light will appear when the Nespresso is ready for brewing.
9. Start with step 4 of the directions to restart the cleaning process. Insert a capsule, depress the lever to shut the device, and then press the button to start brewing coffee.

Problem 3: Why Is My Coffee Not Hot Enough?

If your coffee isn’t hot, warm your cup with hot water from the tap. Descaling is necessary for your VertuoPlus if the issue continues.

Reason 1: Your VertuoPlus Deluxe Required Descaling

The first step is to descale your machine, which should be done every two to three months to clear out any coffee grounds and, simultaneously, get rid of bacteria and any other build-up. This is a frequent cause of the Nespresso machine malfunctioning.

Solution: Descale VertuoPlus Deluxe

Descale your Nespresso with the help of a descaling kit and follow the instructions listed in the heading “Descale your VertuoPlus Deluxe” under “Problem 2 (Reason 2)”.

Reason 2: Cold Coffee Cup

If your Nespresso is extracting hot coffee (steams coming out), but when you sip, it’s just lukewarm. Then, possibly the cup in which you are pouring the coffee is cold enough to lower the coffee temperature.  

Solution: Preheat Your Coffee Cup

Preheat your coffee cup to prevent your coffee from turning into bad-tasting lukewarm water. You can do this in two ways;

• Add hot water into the cup and empty it after some time. Now, pour your coffee into it.
• Pour water into the cup, microwave it for a few seconds, and empty it into the sink. 

Reason 3: Lower Machine Pressure

Continuous brewing has led to low pressure inside your Nespresso Deluxe. This low pressure can also alter the temperature of your beverages. Let’s resolve the issue!

Solution: Run Water Rinsing Brews

Run five water-rinsing brew cycles to develop the pressure again by selecting the largest brew size (Lungo). 

Reason 4: Addition Of Cold Milk

If you add milk to your hot coffee, the chances of lowering the coffee temperature are apparent. Cold milk absorbs the temperature of the coffee and makes it lukewarm. Let’s resolve the problem!

Solution: Use Warm/Lukewarm Milk

One of the best options is to pre-warm the milk before adding it to your coffee. 

Problem 4: Why Is There Low Coffee Pressure And Unusual Coffee Flow In Nespresso VertuoPlus Deluxe?

The low pressure and unusual coffee flow is the standard issue in Nespresso which have been discussed multiple times. Let’s go through them.

Reason 1: Water Reservoir Is Not Seated Properly

This ditch primarily manifests as a result of an unsealed water reservoir. The Nespresso VertuoPlus Deluxe tank is not correctly attached to the machine.

Solution: Place The Water Reservoir Correctly 

The first step is to make sure that your water tank is full and position the water tank by placing it vertically onto the machine’s arm until there is a ‘click’ sound.

Reason 2: Your VertuoPlus Deluxe Required Descaling

This is a common reason for the Nespresso machine not working correctly. Remove limescale buildup by descaling your Nespresso VertuoPlus Deluxe.

Solution: Descale Your VertuoPlus Deluxe

Descale your Nespresso with the help of a descaling kit and follow the instructions listed in the heading “Descale your VertuoPlus Deluxe” under “Problem 2 (Reason 2)”.

Problem 5: Why Does My Vertuoplus Deluxe Leak Water?

You may frequently notice a water-leaking problem with your Nespresso Coffee machine. Water may then emerge from a variety of locations or components after that. The water reservoir and capsule container may be the areas of this system that leak the most. Thus, check that the water tank is securely attached to the Nespresso machine before emptying and cleaning the capsule container with water. 

If the problem persists, then the parts of your coffee maker must be damaged. Let’s go through this issue in detail. 

Reason 1: Leakage Due To Damaged Parts

Damaged parts such as cracked water tank or broken valve could be the root of the problem. Moreover, water leaks could be caused by the residual liquid in the coffee maker. This is because leaks develop as a result of internal rust buildup.

Solution: Repair And Replace Faulty Parts

It can be annoying and difficult to remedy when a Nespresso coffee maker leaks water. Initially, bleeder screws may need to be adjusted, or washers may need to be changed. You could also swap out any other broken pieces.

Above all, give the inside and outside a good scrub with hot water and soap. After that, remove any leftover adhesive tape residue and adjust the valves if necessary. The complete device may occasionally need to be replaced. For the replacement and repair, I suggest getting in touch with Nespresso (1800 812 660).

Reason 2: Clogged Coffee Spout

The coffee nozzle/spout remains in contact with the water and coffee oils; thus, it can get clogged by mineral deposition and coffee oil residues. So, if your coffee machine is leaking, then a clogged nozzle can be an apparent reason. Let’s resolve it!

Solution: Clean The Coffee Spout

1. Take a paper clip or needle and insert it inside the nozzle.
2. Move it around inside the nozzle to loosen any build-ups.
3. Then, run a water rinsing cycle. 

Reason 3: Nespresso Is Clogged

One of the most common reasons for the leaking machine is long overdue to descale. It is recommended to descale your machine every 3-6 months or after 300 coffee cups.

Solution: Descale immediately

Descale your Nespresso with the help of a descaling kit and follow the instructions listed in the heading “Descale your VertuoPlus Deluxe” under “Problem 2 (Reason 2)”.

Problem 6: Why My Nespresso Vertuoplus Deluxe Leaks Coffee?

It will be a great mess if your coffee machine starts leaking coffee while brewing or dispensing. 

While this is not a common problem, it is something for your knowledge. It is rumored that Nespresso regularly leaks coffee. However, if you are facing this issue, then let me tell you how you can resolve it!

Reason 1: Your Nespresso Requires Descaling

Unbelievably, clogged pipes can sometimes be to blame for coffee leaks. These blockages are typically caused by limescale buildup. The likelihood of coffee backing up into the tubes increases as hard water deposits increase. Your machine can be unclogged by descaling alone.

Solution: Descale Your Nespresso

Try to descale your coffee maker by following the instructions listed in the heading “Descale your VertuoPlus Deluxe” under “Problem 2 (Reason 2)” before you panic or become too irritated. If it resolves the issue, you may have just prevented your VertuoPlus from experiencing a more serious malfunction.

Reason 2: Capsule Is Stuck

If coffee is leaking, then the reason can be the stuck capsule inside the pod holder. Let’s resolve the issue!

Solution: Clear The Pod Holder

The primary step you can do is open the machine head and let the capsule be ejected. After ejection, perform cleaning. 

Problem 7: Why Is Nespresso VertuoPlus Deluxe Turned OFF Automatically?

I can understand that this is the most hurtful feeling when your coffee maker turns off suddenly. Let’s check out the possible cause of this problem and its respective solution.

Reason 1: Your Nespresso Turns To “Off” Mode Automatically

To save energy, The Nespresso VertuoPlus Deluxe will turn off automatically after 9 minutes of non-use.

Solution: Turn The Nespresso VertuoPlus Deluxe ON

Push the Coffee button to turn the Nespresso VertuoPlus Deluxe machine ON or “UNLOCK” it by pushing the lever up. If the problem persists, call Nespresso.

Reason 2: Issue With Your Power Source

If you plug your Nespresso into the power outlet and it turns off automatically, you must have an issue with your power source.  

Solution: Check The Mains, Plug, Voltage, And Fuse

Before plugging your machine into the power source, you must check the mains, plug, voltage, and fuse. Maybe your Nespresso’s power specification (120 V) does not match your home power source. In case of a problem, call the Nespresso Club (1800 812 660). 

Problem 8: I Find Coffee Grounds In The Cup Of Coffee. 

It always makes for a sad day when you reach for your favorite coffee, brew it up in your Nespresso with immense anticipation, take the first heavenly sip, and taste bitter solids on your tongue instead of pure bliss. Yep, we have all been there once or twice. It is a classic case of coffee grinds in the mug. Let’s see how we avoid these coffee grounds in our cups of coffee.

Reason 1: Damaged Coffee Capsule

If the coffee capsule is damaged (whether before insertion or during extraction), then the grounds will get mixed with the extracted coffee, and come into your cup.

Solution: Use Fresh Capsule

Lift the lever and eject the capsule. Now, insert a fresh (undamaged) capsule and start making coffee again. However, if you find the capsule intact, then run a water rinse cycle. 

Reason 2: Capsule Container Is Full

A full capsule container can cause blockage and ultimately rupture the capsule in the pod holder. Therefore, you are suffering from coffee grounds in your cup. Let’s see how you can resolve this issue!

Solution: Empty Capsule Container

Remove the capsule container and dump all the used capsules into the dustbin. Now, replace it, run a rinsing cycle and start brewing coffee again.

Reason 3: Capsule Stuck In The Pod Holder

Sometimes, the capsules get damaged while closing the lid, and these damaged capsules get stuck when ejecting. The coffee grounds get released from the damaged capsules and start coming to your coffee cup.

Solution: Clear The Pod Holder

Lift the lever and remove any stuck coffee pod. After this, run a water-cleansing cycle. Your coffee maker is ready to brew again!

Reason 4: Lever Is Opened Too Soon

If you are suffering from the problem of coffee grounds coming into your coffee cup, then maybe you are opening the extraction unit (coffee pod holder lever) immediately after the brewing or between the brewing. Let me tell you the solution! 

Solution: Wait Before Opening The Extraction Unit

First of all, you should never lift the lever (open extraction unit) while brewing is in process. Secondly, once the brewing is finished, wait for approximately 2 or 3 seconds before lifting the lever (opening the extraction unit). 

Reason 5: Accumulation Of Coffee Residue

If you notice coffee grounds in your coffee cup, it may be due to the accumulation of coffee residue in your coffee machine after prolonged use.

Solution: Descale Your Nespresso VertuoPlus Deluxe

In that case, you have to clean your Nespresso machine by performing the cleaning procedure 2 times. I have discussed the cleaning procedure of your coffee maker in detail under the heading “Descale your Nespresso VertuoPlus Deluxe ” under “Problem 2 (Reason 2)”.

Problem 9: My Nespresso VertuoPlus Deluxe Fails To Pierce Capsule.

Does your Nespresso VertuoPlus Deluxe coffee maker not pierce or punch the capsules badly? Does your coffee come out in minimal quantities? There must be a reason for these problems. Let’s go through them!

Reason 1: Faulty Puncturing Needle

The coffee will not be produced if the machine does not pierce the pods. Check the puncturing needle first; if it is broken off or bent, it won’t operate.

Solution: Replace The Faulty Puncturing Needle

The needle may need replacing. Contact Nespresso (1800 812 660), or hire an expert to replace the needle.

Reason 2: Incompatible Coffee Pods

You are using off-brand capsules incompatible with your Nespresso if your pods fail to pierce inside your Vertuo. Given the variety of Nespresso machines and universal pods available, it’s simple to mistakenly buy the wrong pods. Only Nespresso pods are compatible with the most recent devices. 

Solution: Use Only Nespresso Vertuoplus Compatible Coffee Pods

The VertuoPlus Deluxe is from Nespresso’s VertuoLine product line and only compatible with Nespresso Vertuo capsules and can not use any third-party alternative pods. 

Sadly, the Original capsules cannot be used in the Vertuo machines, the standard original capsules only fit Original line machines, and the Vertuo capsules only work in the Vertuo line machines.

Reason 3: Clogged Puncturing Needle

A puncturing needle is used to puncture the coffee pod. And if coffee pods are not get pocked, then the coffee grounds must be accumulated on the needle, which fails to pierce the coffee pod. 

Solution: Unclogged The Puncturing Needle

1. To begin cleaning, first, remove the pod holder assembly from your brewer.
2.  Then, detach the funnel from the assembly. 
3. Once the funnel has been removed, locate the exit needle on the inside bottom of the K-Cup pod holder. 
4. Take a straightened paper clip and insert it into the exit needle, gently loosening any coffee grounds that may have accumulated. This will help ensure that your brewer continues to function properly and produce great-tasting coffee.

Now, lift the lever and search for the puncturing needle at the bottom

You can then try to use the capsules again, and hopefully, you have fixed the problem. 

Problem 10: Why Does My Nespresso Machine Have No Pressure?

A decent cup of coffee is fundamentally made by the machine’s pressure. The maximum pressure for Nespresso coffee makers is 20 bar + 3, which refers to the pump design. You will only receive the required taste or amount of coffee in your cup if there is sufficient pressure, and occasionally no coffee will be extracted at all. Let’s examine the potential causes of this problem and their corresponding solutions.

Reason 1: Your Nespresso Run Without Water In Water Tank Or Water Tank Does Not Attach Adequately

If you’ve ever allowed the water in the reservoir to run out, your Nespresso machine may have sucked air in. The pressure inside will change, which could prevent you from enjoying the complete Nespresso experience.

Solution: Run Water Rinsing Cycle

Nespresso Vertuo machines, sadly, cannot run a water-only cycle because they need a pod with a barcode inserted to brew. Take a pod, remove its foil and coffee grounds, rinse it off, and then insert it into the machine. Press the coffee button to begin brewing after filling the water tank to the MAX line. Repeat this process five to ten times or more until water gushes out.

Reason 2: Your VertuoPlus Deluxe Required Descaling

Descaling the coffee maker is necessary to eliminate limescale and other leftover calcium. When you measure the volume of the coffee once more after the descaling procedure, the issue will have been resolved.

Solution: Descale your VertuoPlus Deluxe

Descale your Nespresso with the help of a descaling kit and follow the instructions listed in the heading “Descale your Nespresso VertuoPlus Deluxe ” under “Problem 2 (Reason 2)”.

Reason 3: Wrong Coffee Pods

The most common cause of the problem is the faulty coffee pod. Nespresso VertuoLine reads the barcode of the coffee capsule to extract the coffee. If you use the wrong pods, pressure will not build up.

Solution: Use Compatible Vertuo Coffee Pods

If your machine has no pressure, you should perform a few things. One choice is to experiment with using a different kind of coffee pod. Use only coffee pods compatible with Nespresso Vertuoline.

Also, you need to look for any debris or particles. The machine’s pipelines or mechanisms may have become clogged with these objects. Finally, you might have to change the pump.

Problem 11: Why Is There No Water Coming Out Of My Nespresso Vertuo?

No water coming out can be frustrating when you want to brew coffee to kickstart your day. However, no need to be worried as here I am with the possible causes and solutions. So, let’s discuss! 

Reason 1: Disk That Pierces The Capsule Is Stuck

The machine’s capsule container should be able to rotate freely and slightly rise and fall. A disk pierces the Nespresso capsule and is located on the opposite side of the capsule container. This disc ought to spin freely as well.

This disc that pierces the Nespresso capsule may become stuck or challenging to spin if you’ve used your Nespresso Vertuo for a while and scale and leftover coffee grounds build up.

Solution: Unstuck The Disk With The Help Of A Small Brush

Open the handle and unplug your device to remedy this. Use a little brush to rub vinegar to the disc. After letting it sit for a while, thoroughly rinse it with water.

You can also remove the water tanks and turn the machine on its side for easier access. Once you’ve completed this, the disc should usually rotate once more.

Reason 2: The Tubes Inside The Nespresso VertuoPlus Deluxe Are Clogged

The disc may also become blocked if you’ve had your Vertuo for a while and haven’t routinely descaled the coffee maker. Moreover, mineral buildup can jam the Vertuo’s tubing.

Solution: Descale Your Nespresso Vertuoplus Deluxe

To ensure that you remove all the scales that escaped when you pumped water into the tubes, run a descale cycle on your Vertuo. To know the descaling process in detail, see the section “Descale your Nespresso VertuoPlus Deluxe ” under “Problem 2 (Reason 2)”.

Reason 3: Air Bubble Issue

If you clicked the brew button when there wasn’t enough water in the reservoir, an air bubble might get trapped inside the machine.

Solution: Use Turkey Baster To Remove Air Bubble

Fill the water tank halfway with water to remove the air bubble. After you have something like a turkey baster, place it on the water suction port in the tank. Press the brewing button and firmly spray the water in as the coffee maker is trying to brew a cup.

Tip: A straw or syringe could be used in place of the turkey baster.

Also, you can take the water tank out and attach a tube to the water suction port. Ensure the tubing connects to it smoothly. Blow into the tube from the opposite side after filling it with water. This ought to produce the same result.

If you have tried the solutions above and your Vertuo is still not producing water. Then getting in touch with Nespresso support (1800 812 660) is your best bet.

They will probably fix your machine for free or even send you a new one if it is still covered under warranty.

Problem 12: Why The Vertuoplus Does Not Start And Has A Green Steady Light?

The steady green light indicates that the machine is ready to brew coffee. But there must be a glitch if the coffee button shows a steady green light and your device is not brewing coffee. Let’s see how you can resolve this problem.

Reason: Issue With VertuoPlus Setup

The possible reason for this issue is maybe you did not set your VertuoPlus according to the user manual. Let’s check whether you put your Nespresso correctly or not.

Solution: Check The SOPs

Let’s check the SOPs together, and after ensuring each point, mark each in your mind.

•  If you want to brew an Alto, Coffee, or Espresso, check that a new capsule is inserted in the correct position in the capsule container. Ensure that the dome shape of the coffee capsule faces downward.
• Close the machine head by pushing the lever down. The machine head will close automatically, with an electrical mechanism. 

If the problem persists, call Nespresso (1800 812 660).

Problem 13: Why Is The Green Light Blinking Continuously And Machine Not Running?

Blinking of green light is a small issue to care for. Let’s understand the possible reason for this.

Reason: Nespresso Is Heating Up For Brewing

The primary reason for the green light flashing is that the machine is heating up.

Solution: Wait For A While

The green light blinking will take twenty-five seconds for the Nespresso VertuoPlus Deluxe To be ready for brewing. After twenty-five seconds, the machine will show a steady green light, indicating that Nespresso is prepared for brewing. You should wait a maximum of one minute, but if the green light still blinks after one minute, then turn off the machine and contact Nespresso.

Problem 14: Why Is My Nespresso Showing Half Red & Half Green Steady Light?

Undoubtedly, the light system in your Nespresso is for communication between machines and you. But sometimes, these flashes and blinking become a headache when you can’t understand the meaning. Let me tell you what to do in the current situation! 

Reason: Your Nespresso Needs Descaling

The issue is relatively straightforward, but the remedy is exhausting if the Nespresso machine consistently displays a light that is half red and half green. Fundamentally, your Nespresso machine needs to be phased out. Nevertheless, you ought to already be doing this frequently!

One remarkable aspect of Nespresso machines is that they don’t let the device shut off before giving an error message. They always include warning signs to let you know when an issue arises.

Solution: Descale Your Machine 

Despite waiting for the red light error, we recommend descaling your Nespresso machine every two to three months. Delaying the descaling process could shorten the lifespan of your VertuoPlus Deluxe. To know the descaling process in detail, see the section “Descale your Nespresso VertuoPlus Deluxe ” under “Problem 2 (Reason 2)”.

Problem 15: Why Is The Red Light Blinking Continuously, And The Machine Head Stops Moving?

Is the red light continuously flashing? Has the head stopped moving? If so, you need to remove any obstacles, empty the coffee pod container, and open or close the head depending on its position. Let’s dig deep into it.

Reason 1: Obstruction In The Machine Head

A red light that blinks continuously indicates a blockage in the machine head. You mustn’t force the machine head to close or move since. 

Solution: Remove Obstruction In Machine Head

Inspect the machine head for any impediments or items (Probably the used capsule or clog) that might be stuck and prevent the machine head from moving. Once any obstructions have been examined and removed, try opening and shutting the machine head. The flashing red light will stop.

Reason 2: Capsule Container Is Full With Used Capsules

Moreover, a full capsule container may also cause this red light that flashes continuously.

Solution: Empty the Capsule Container 

Clean and empty the capsule container if the red light continues. The light should eventually cease flashing. If it doesn’t, it’s time to ask for assistance.

Problem 16: Why Does My Nespresso Machine Not Start And The Red Light Blinks 2 Times, And Goes Back To Steady Green?

Either your water tank is empty, or a capsule is missing from the head. The reasons for this issue are common, and their solutions are easy to follow. Let’s go through them.

Reason 1: Empty Water Tank

An empty water tank is the most likely cause of a red light blinking twice before steadily becoming green.

Solution: Fill The Water Tank To The Maximum Level

Check the water in the tank immediately to start with the more straightforward solution. The Nespresso machine leaking can be due to an empty water tank. Fill the water tank with fresh water.

Reason 2: Issue With Capsule

Due to a problem with the capsule, you will also notice that the Nespresso machine is not functioning. Check the capsule’s insertion if filling the water tank doesn’t solve the problem.

Solution: Reinsert The Capsule

Check the capsule by opening the machine head. Remove the old pod and place a new one or correctly re-insert it.

Your difficulties will probably be resolved by using these solutions. The machine will resume operation after the red light stops flashing.

Problem 17: Why Does The Machine Not Start And Red Light Blinking 3 Times Every 2 Seconds And Goes Back To Steady Red?

Red Light indication means that your coffee maker is at risk. So to resolve this issue, immediately check that there is any debris or small stuff present inside the machine. Let’s understand this in detail.

Reason: Obstructions Inside Your Nespresso Machine

This indicates that your Nespresso machine has obstacles within. These impediments not only prevent the device from operating as it should and cause the red light to blink every two seconds before becoming steady.

Solution: Remove The Obstruction

There are a few options for resolving this. Open the machine head and look inside for any obstacles first. Remove any barriers if there are any. You can also completely clean the pod container as an additional option. To clean the container, blow on it or use a dry towel. This problem can be resolved by inserting a new capsule into the device.

Problem 18: Why Is There Red Steady Light And The Machine Not Running?

The machine not running is the most frustrating problem for a coffee lover. So, let’s resolve the issue and find the best solutions!

Reason: Your Nespresso Machine Is Overheating

Your Nespresso machine is overheated if it consistently displays a red light. The Nespresso will overheat if you use it heavily quickly or fail to turn it off for an extended time. When that happens, the machine needs time to cool down.

Solution: Let The Machine Cool Down

The machine should be turned off, unplugged, and left to cool for at least 15 minutes or longer. Letting it cool longer is ideal. After some time, you can switch the machine on and use it peacefully. But do not force the Nespresso to run if the issue continues; instead, ask for assistance (1800 812 660).

Problem 19: Why The Red Light Fades Out in My Nespresso?

A fading red light is no reason to panic. It means your machine is cooling down, and a solid GREEN light will appear when ready.

Reason: Your Nespresso Machine Is Cooling Down

The majority of Nespresso owners become anxious in this red light scenario. The Nespresso machine appears to be bidding a final farewell, but it is not. The Nespresso machine is cooling off as the red light progressively fades.

Solution: Let The Machine Cool Down

It is advised that you avoid using the Nespresso machine during this period. Wait until it has cooled and the green light turns back on.

Problem 20: Why Is The Red Light Flashing Twice And Goes Back To Orange Blinking?

Don’t know what the meaning of this kind of flashing is? Are you worried about it? Do you think your machine is going to die? Relax your nerves and let me tell you the reason and its solution! 

Reason: Your Nespresso Machine Is Running Special Functions

A specific function is being done on the Nespresso machine when a red light flashes twice, followed by an orange blinking light. Your device may perform the following four unique tasks in total:

1. Descaling
2. Cleaning
3. Emptying the System 
4. Restore Nespresso to its default settings.

Solution: Let The Ongoing Process Completed

Nothing to worry about! Just complete the ongoing process in your coffee machine, and your machine will be ready to use again. 

Problem 21: Why Does The Orange Light Blink Continuously On My Nespresso?

Blinking orange light can have several meanings. Let me tell you the exact cause and solution of the current blinking pattern of the orange light on your Nespresso coffee machine.

Reason: Your Nespresso Is In Special Function Mode

Most of the time, an orange light is not a cause for concern, unlike occasionally when a red light appears. So, it is most likely that your machine is just in one of the specific function modes in the Nespresso blinking orange scenario.

Solution: Descale, Clean, Empty, Or Factory Reset Your VertuoPlus

You can use the machine’s lever to select from the special functions menu. Your Nespresso will be in like-new condition if you follow the instructions for any particular feature that the device specifies in the user manual. 

Nespresso VertuoPlus Deluxe Troubleshooting Guide

Do you still need clarification about some points? Don’t worry; I am here to find all the solutions to your problems with Nespresso VertuoPlus Deluxe. Below I have answered the most commonly asked questions of coffee maker users. So scroll down! 

Can My Nespresso Machine Be Repaired?

If required, Nespresso can offer a full-service Assistance Package, including complimentary* pick up and repair your machine and return it to your address.

Does Nespresso Have A Lifetime Warranty?

All Nespresso Machines and Aeroccino are covered by a 2-year warranty from the purchase date.

How Much Does It Cost To Repair A Nespresso Machine?

Costs vary widely depending on the make and model of the machine as well as its age and condition. Repair costs for most superautomatic devices range from $150 – $350; semi-automatic machines are typically much less.

Why Is My Nespresso Not Working After Descaling?

That can indicate that your Nespresso is still in descaling mode or has a problem with your machine. If it continues, switch off the device, unplug it, plug it back in, and continue with the Nespresso reset.

In this article, I’ve discussed all the typical problems with your Nespresso VertuoPlus Deluxe and their potential fixes. Now within your VertuoPlus, you can quickly fix any specific situation and have a great cup of coffee to energize you. If, however, despite using these suggestions, you still need help getting your Nespresso machine working smoothly and looking brand new, it may be time to get in touch with Nespresso Club. You can always count on the support of Nespresso’s superb customer service. Nespresso machines are made of high-quality parts that, with careful care, may last a lifetime.

I sincerely hope you’ve liked my guide on restoring your Nespresso VertuoPlus Deluxe machine to its former splendor, and I’d appreciate it if you shared it with your friends.

I wish you success with your Nespresso VertuoPlus Deluxe!

Conclusion 

While the Nespresso VertuoPlus Deluxe has encountered some operational challenges, it remains a highly regarded coffee machine appreciated by many users worldwide. By understanding and troubleshooting the issues discussed in this article, users can overcome these problems and continue to enjoy the convenience and indulgence of freshly brewed coffee at home. Remember, seeking assistance from the manufacturer or professional technicians can provide further guidance and resolutions to ensure the optimal performance of the Nespresso VertuoPlus Deluxe.

FAQs

Why Is My Nespresso Vertuo Plus Machine Not Working?

Check these basic options first if your Nespresso is not working. But, if you still face the problem, then contact Nespresso.

• Verify that the water tank is positioned correctly and that it is filled.
• Make sure the new capsule is positioned correctly.
• Close the machine head, then press the start button.
• Descale if necessary. 
• Allow the capsule to be ejected by opening the machine head.

How Do I Reset My Nespresso Vertuoplus Deluxe?

Reset your Nespresso VertuoPlusDeluxe by following these simple steps.

• Push the lever down for three seconds to “OFF” the machine.
• Push the button and the lever down simultaneously for three seconds to activate the Factory settings mode. Entrance into the Special Functions menu is indicated by a constant ORANGE light.
• To select “Reset to factory settings,” depress the lever three times.

NOTE: Choose the desired function within the next two minutes. Otherwise, the system will return to Ready mode.

• The “Factory reset” function will be shown by the ORANGE light blinking three times every two seconds.
• To confirm, press the button. When the reset is complete, the ORANGE light will blink three times in three seconds before turning steadily GREEN. The device is now prepared for use.

NOTE: To exit the Special Functions menu at any time, simultaneously press the button and the lever down for three seconds. The machine is prepared when the light is steady GREEN.

How Do I Get My Nespresso Vertuoplus Out Of Descaling Mode?

Press and hold the button and the lever simultaneously for three seconds, or until the light turns green, to end the descaling mode. Give the machine ten minutes to rest. The device is currently prepared for use.

I Descaled My Nespresso, And The Light Is Still Red?

If the machine has been fully descaled, the issue must be somewhere else, but the red light is still on. Several issues contribute to the red light issue with Nespresso machines.

Hence, if descaling wasn’t successful, look for alternative solutions to the problem. Restart the machine, clean the capsule container, re-insert the capsules, check the machine’s head for obstructions, and more. The answer must be one of these items!

What If The Red Light Error Still Persists?

Do the red light remedies for the Nespresso machine at your place according to the relevant module first. Second, if the device blinks red, Contact customer service and voice your complaint. However, you might first investigate whether any solutions are given in the user handbook.

Get an expert’s assistance if the red light problem keeps happening and the Nespresso machine isn’t functioning.